SP flash Tool is a handy flashing Software that can be used to restore a bricked MTK Android Device like Nokia, Micromax, Infinix Tecno, Gionee, Wiko, Lenovo, Oppsson, ZTE Blackview Etc. it supports almost all Android Phones that run on MediaTek Chipset, unlike other tools that perform a similar task, SP Flash tool is basically free and it requires neither a Box nor dungle to start working
Recommended : Download Android USB Drivers for Windows and Mac
What is SP Flash Tool
It is an application which mainly helps you to flash Stock ROM. In fact, SP tool makes bridge or connection between mobile and PC that allows you to flash Android Stock ROM, Pre-Resources files like custom recovery, configure control and other features. SP tool works with MTK (MediaTek) based Smart Phones.
SP Flash Tool Features
- Flash Stock ROM (Scatter Based)
- Flash PreResources file
- Format and Hard reset
- Flash Custom ROM (Scatter based)
- Erasing / Formatting / Reset Your MTK based device.
- Advanced Memory testing and verifying
How to Use SP Tool on your PC or Laptop
Step 1: Download SP Tool from below and Install Mediatek VCOM USB Drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone. After then switch off your phone.
Step 2: Extract Stock ROM and SP Flash Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.
Step 3: Click on Scatter-Loading option. SP Flash Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file Android_scatter_emmc.txt which is your stock Rom scatter file.
Un-tick the Box in front of any item you do not wish to Flash (If you forget your Phone password you can easily wipe your data by ticking “USRDATA” at the bottom )
Step 5: SP Tool auto-detect your phone and process will start. If Sp Flash tool is not recognize or detect your phone then install vcom drive. After install Vcom driver reconnect your switched off phone with the PC.
Step 6 : Be patient on till you get a success Message (A green Cycle with OK)
Disconnect the Phone from the USB Cable, remove the Battery for 10 seconds (if removable), reinsert the battery and power up the Phone. Finally, go to recovery mode and do a factory reset to clear any error. Congratulations !!
If you feel any problem of flashing or update your phone then watch this video. I hope you like this SP Tool and you can easily install or flash ROM and custom recovery on your Android device. If feel any problem in this guide then please use comment box. Thank You!
sp flash tool 5.1744 zip – Download